Placing an Order for Syringes

Pharma / TRT
8

[quote]Hussayn wrote:
I’ve read countless times on this board that 18 gauge is cool to draw in:

LillGuy001 wrote:
I also draw with an 18 and use a 23GA to inject. All in all prep and injection time is less than 5 mins.

Just be careful with the 18GA. If you draw from too close to the same spot through the stopper everytime it can cause small particles to fall into the solution.

See YA

rainjack wrote:
I inject with 25 guages, and can get the oil injected in less than a minute.

Drawing with an 18 is good advice.

https://www.T-Nation.com/free_online_forum/sports_training_performance_bodybuilding_gear/choosing_the_correct_needle_gauge

[/quote]

Obviously it’s not the end of the world using an 18g. Over time the 18g will noticeably fuck with the integrity of the rubber. That’s all. It’s not really a big deal at all but if the choice is available, I’d scrap the 18